4
(2) Keep an area 0.5 m either side and (1)5 m in front of the docking station clear
of obstacles and reflective objects (such as mirrors, metals and glass).
(3) We recommend DEEBOT starts cleaning from the docking station. (If DEEBOT
is not in the station, please move it in front of the docking station first and tap the
Recall button on the docking station so DEEBOT can return.)
(4) Make sure the docking station is not on a carpet.
4.
Q: Why can't DEEBOT recharge?
A: (1) Make sure the power switch on DEEBOT's underside is switched on.
(2) Check that the battery is corrected fitted in place on DEEBOT's underside.
(3) Check that the outlet has power, and that the electrodes are fully in contact.
The Auto button flashes when the electrodes are in contact.
(4) If the problem persists after following the steps above, please contact
ECOVACS Customer Service.
5.
Q: Why didn't DEEBOT start cleaning automatically at the scheduled time?
A: (1) DEEBOT will not carry out scheduled cleaning while in Do Not Disturb mode.
(2) DEEBOT is not powered on.
(3) DEEBOT does not have enough battery power to clean.
(4) If the problem persists, please contact ECOVACS Customer Service.
6.
Q: How do I select DEEBOT X1's suction power?
A: You can set the suction power via the App or a YIKO smart voice command:
Quiet mode, Standard, Max, Max+.
(1) There is reduced suction power in Quiet mode. Vacuum and Mopping mode
