9
Seat Post Installation
1.
Please pay attention to the vertical lines on the seat post, it is the minimum insert line or safety
line, please make sure the post is installed into the frame deeper than the minimum insertion
line. It is at the bottom of the seat post (Figure 3.1).
2.
Unclamp the clamp on the seat tube, insert the seat post into the seat tube, adjusting the seat
to a comfortable height, tighten the tension adjusting nut, then press the clamp lever inwards
toward the seat tube (Figure 3.2).
PLEASE NOTE:
If necessary, tighten the clamp by twisting the clamp handle clockwise while in the
unclamped position. Then, fold the handle in toward the seat post. This should require a fair amount of
force to ensure the seat post is held tightly. If necessary, the clamp can be further tightened with a
5 mm Allen wrench while in the clamped position.
Summary of Contents for FAT26S900
Page 1: ...Fat26S900...
