11
Battery Installation, Removal and Charging
1.
Battery installation
Turn the key (normally the keys are tied on the clamp of the seat tube) to unlock position
(Figure 5.1). Line up the grooves on the battery and battery holder (Figure 5.2), then slide the
battery down, turn the key to lock position (Figure 5.3) and remove the key.
PLEASE NOTE:
The function of the lock is to secure the battery in place on the frame only. It is not an
ignition style key system but more of an anti-theft lock mechanism for the battery.
2.
Battery removal
Do the same thing as when you were installing the battery but in reverse order.
3.
Battery charging
Find the charging port on the battery (Figure 5.4). Connect the charger's plug to the battery
charging port, then connect the other side plug to the AC 110 volt outlet. The LED on the charger
is red while charging. It will turn to green when the battery is fully charged. It will take six to
eight hours to fully charge the battery. Remember to fully charge the battery before your first
ride.
This is very important.
PLEASE NOTE:
there is a small button on the battery. Press and hold the small button to see the
remaining battery capacity through a set of red and green lights. It will show one red and three green
lights when fully charged (Figure 5.5).
Summary of Contents for FAT26S900
Page 1: ...Fat26S900...
