Table of Contents
1.4.c Water Connections to Heat Pump
1.4.d In-Line Chlorine Feeders
1.4.f Adjusting Water Flow Using ΔT (Delta-T)
1.4.g Adjusting Water Pressure Switch
1.5.b Incoming Power Access Holes
1.5.d Verifying Transformer Setting
1.5.g Connecting an External Controller
1.5.h Programming for an External Controller
1.6.a Service Level Factory Defaults
1.6.b Enter Service Level Programming
1.7 Cleaning Equipment After Installation
2.1 Display Door (Only available on select equipment)
2.5.a User Level Factory Defaults
2.5.b Selecting Celsius or Fahrenheit
2.5.e User Lock Option (Enable)
2.5.f User Lock Option (Disable)
2.5.g Using Pass Code to Access Heat Pump
2.5.h Operating Heat Pump (With an External Controller)
i