Page - 36
2.5.f User Lock Option (Disable)
Use "UP" button to
enter existing
password.
Press "Pool / Spa"
button to unlock.
Hold "UP" and
"DOWN" buttons
until
CF1
is
displayed.
Press "POOL /
SPA" button until
ULC
is displayed
Press "DOWN"
button until "0" is
displayed.
2.5.g Using Pass Code to Access Heat Pump
If
LOC
is briefly displayed when attempting to change a heat pump's settings followed by a "0", the heat pump
has the user lock enabled. A numerical pass code is required to proceed.
Press "UP" or "DOWN"
arrow to enter pass code.
Press "POOL / SPA" button
to unlock.
NOTE -
l
After ten seconds of inactivity, the heat pump's display lock will activate.
l
If the user-lock code has been misplaced, please contact Eco Therm for further assistance.
