Page - 28
Reset to Factory Defaults Settings
NOTICE
Failure to heed the following may result in damage to equipment.
l
Using this option will reset ALL settings to their factory defaults including
external controller settings and sensor calibrations. DO NOT perform this
operation if unsure of site specific settings or how to reset them on the heat
pump.
l
If a qualified technician is unavailable, please
1. Simultaneously Press "Pool / Spa" button and "Up" button
until the display shows
888
.
2. Release buttons. Reset is complete.
1.7 Cleaning Equipment After Installation
Installer - If you need to clean equipment after installation, please use the following guidelines.
WARNING
Failure to heed the following may result in injury or death.
l
Possible electric shock hazard - Deactivate power to all electrical devices on the pad
when washing heat pump. Do not restore electrical power until equipment is
completely dry.
NOTICE
Failure to heed the following may result in damage to equipment.
l
Do not use a pressure cleaner to wash heat pump. Damage to heat pump
components may result. If using a hose-end spray nozzle adjust spray pattern to
low strength only.
l
Do not spray water directly into the interior of the heat pump; damage to
components may result.
