Page - 29
Cleaning
1. Wash outside cabinet using a low-pressure water hose. A high-pressure water stream will cause damage to the
aluminum fins of the heat pump. This damage is not covered under product warranty.
2. While the heat pump is still wet, use an approved cleaning agent to clean the exterior of the heat pump.
Do not
use chemicals on the display panel.
3. Use a detergent-dampened cloth to wipe the heat pump's exterior cabinet.
4. Flush all exterior with fresh water using a low-pressure water hose.
5. Dry the exterior cabinet using a soft cloth being careful not to damage evaporator fins.
APPROVED CLEANING AGENTS
•
Fantastic
®
Formula 409
®
Cascade
®
All Power Plain Detergent (3% Solution)
Table 4 - Cleaning Agents
Polishing
1. Polish the heat pump's cabinet panels using an approved polishing agent and following the manufacturer’s
instructions. Do not use chemicals on the display panel.
2. Rinse the heat pump panels with fresh water, wipe, and buff panels using a dry soft cloth.
3. Allow heat pump interior and surrounding equipment to "air-dry" for several hours prior to restoring electrical
power.
APPROVED POLISHING AGENTS
•
Simoniz
®
Wax
Glo-Coat
®
Armor All
®
Protectant
Table 5 - Polishing Agents
•
The trademarks used in approved cleaning and polishing agents are property of their owners and are not
related to Eco Therm.