Ecostrad_Ecowärme_V1.2_09022022
6
• The device must only be installed in an upright and fixed position in accordance with
national installation rules.
• Do not use the radiator with a programmer, timer, separate remote control system
or any other device that switches the heater on automatically, since a fire risk exists if
the heater is covered or positioned incorrectly.
• Make sure the minimum safety distances from walls and objects stated in
on page 7 are observed at all times. This is very important to
prevent damage to walls, furniture and soft
furnishings and to prevent the
product overheating and causing a fire hazard.
• Do not use the device in rooms where contact with flammable or potentially
explosive materials like dust, gas or vapour cannot be avoided.
• Do not use in rooms or environments that have a corrosive atmosphere. Avoid humid
surroundings.
• Do not operate the device when wet. If the device gets wet during cleaning,
allow
it to dry out before using.
• Do not expose the device to water jets.
• Do not transport the device during operation
• Do not sit on the device.
• Do not overload the socket used to power the device.
• Before carrying out maintenance, care or repair work on the device, ensure the
device is unplugged. Do not use the cable to tug the plug from the socket. Hold
the plug by its housing and pull.
• Switch the device off and disconnect the power cable from the mains socket
when the device is not in use.
• Allow the device to cool down before touching or transporting the device, or
attempting maintenance work.
• The device must be placed where the switches and controllers cannot be touched
by a person in a bathtub or shower
