Ecostrad Ecowarme Instruction Manual Download Page 15

Ecostrad_Ecowärme_V1.2_09022022

15

the temperature and the   icon. Now press and hold the Standby Button for 10 

seconds. The numbers 1-7 will appear on the right side of the screen.

5-5-1 | Eco mode settings

The first option of the advanced settings, indicated by an arrow 

pointing to 1, is the Eco mode setting. Here, you can adjust the amount 

by which the Eco set temperature is below the Comfort temperature. 

Use   and   to set the difference between 0 and 10 °C. Press OK to 

confirm and move to the next setting.
If you do not want Eco mode’s temperature to be a set amount below 
Comfort mode’s temperature, press   until the screen shows ----. 

Now, the Eco temperature can be adjusted in the main mode screen, 

just like Comfort mode.

Press 

 to confirm and move to the next setting. 

5-5-2 | Temperature offset

The second option, indicated by the arrow pointing to 2, is the temperature offset 

setting. 
Temperature offset allows you to adjust for any discrepancy between 

the average room temperature and the temperature sensed by the 

thermostat. For instance, if the temperature in the room is 18 °C, but the 

radiator is sensing and displaying 16 °C, a value of +2°C will offset the 

difference.

Use   and   to adjust the temperature offset. It can be set between 

-5 and +5 °C, in steps of 0.1 °C. 

Press 

 to confirm and move to the next setting. 

5-5-3 | Backlight timeout

The third option, indicated by the arrow pointing to 3, is the backlight 

time-out setting. The display screen of this device features an 

adjustable backlight, allowing you to set the amount of time it takes for 

the screen to dim. This time-out can be set between 0 and 225 

seconds, in steps of 15 seconds. By default, the backlight time-out is set 

to 90 seconds. 

Use   and   to adjust the backlight time-out. Press OK to confirm and move to the 

next setting. 

5-5-4 | Auto mode temperature display

The fourth option, indicated by the arrow pointing to 4, is the Auto mode temperature 

display setting. This setting allows you to choose whether the room temperature or 

the set temperature is displayed when in Auto mode. 

Summary of Contents for Ecowarme




















Reviews: