Ecostrad Ecowarme Instruction Manual Download Page 5

Ecostrad_Ecowärme_V1.2_09022022

5

Warning

In order to avoid a hazard due to inadvertent re-setting of the thermal 

cut-out, this appliance must not be supplied through an external switching 

device, such as a timer, or connected to a circuit that is regularly switched 

on and off by the utility.

Warning

Do not cover the radiator, nor place flammable objects on the 

radiator.

Warning

Some parts of this product can become very hot and cause burns. 

Do not touch the surface when in operation. Do not install close to 

curtains or other combustible materials. Particular attention should be 

given where children and vulnerable adults are present. 

Warning

Do not use the device in enclosed spaces if persons are present who cannot 

leave the room independently and are not under constant supervision.

• Keep the power cable away from all hot parts of the appliance. 

Do not use the device if you detect damage to the mains plug or power cable. If the 

supply cord is damaged, it must be replaced by the manufacturer, its service agent 

or similarly qualified persons to avoid a hazard. 

• All repairs and servicing must be carried out by a qualified person. To avoid 

danger any repairs must be completed by the manufacturer, a service agent of 

the manufacturer or a similarly qualified person. 

• Make sure that the voltage indicated on the rating plate for this appliance 

corresponds to your power outlet. 

• The device must not be located immediately in front of or below an electrical socket 

outlet. 

• Do not use this device in the immediate surroundings of a bath, shower, 

swimming pool or any other water container. Risk of electric shock. 

• Do not use the device with wet or damp hands.

• No part of the appliance should be submersed in any type of liquid.

• Cleaning should be carried out using a damp cloth only. No abrasive chemicals 

or materials should be used. For more information see section 

6

.

• Never insert fingers or other objects or body parts into the device. Risk of electric 

shock or injury. 

• Do not use any accessories with this device. Use of accessories may cause 

damage or danger. 

• Keep the device away from curtains and other flammable materials. 
• The device is for indoor use only. 

Summary of Contents for Ecowarme




















Reviews: