ENGLISH
Before You Start
Tools and Supplies
Before beginning the installation, be sure that the following tools and
supplies are at hand:
• Gloves
• Safety Glasses
• Phillips screwdriver
• Non-corrosive leak-check solution
• Adjustable wrenches (2X)
• 1 AAA battery
• 10mm Wrench
• 11mm Wrench (for NG conversion only)
• Flat screwdriver
Initial Safety Inspections
Before assembling the appliance it is important to inspect the following
and determine if it is safe to proceed:
• Carefully remove all burner components from packaging.
• Check for damage. Do not use damaged components.
• The hose assembly must be replaced prior to the appliance being put
into operation if there is evidence of excessive abrasion or wear, or if
the hose is damaged. Do not use parts other than those specified by
the manufacturer.
• The burner must be replaced prior to the appliance being put into
operation if it is evident that the burner is damaged. Do not use parts
other than those specified by the manufacturer.
• Position the assembly in the desired location. This location must be
adjacent to the gas supply line. You must have easy access to the gas
valve control knob after it is installed and connected to the gas supply
because the ON/OFF gas valve is used to turn the burner on and off.
The location for the installation must be out of the pathways where
people may trip over it or in areas where the hose may be subject to
accidental damage.
In addition, for LP Gas Models:
• Be certain to mount or set the LP gas cylinder on a flat stable
surface and restrain it to prevent it from tipping.
• Make sure the tank valve is turned completely off (clockwise).
• Ensure the tank valve has the proper external mating
threads (tank valve marked “USE WITH TYPE 1”).
• Inspect the hose shipped with the appliance for any
damage. Do not use if there is evidence of damage.
• Once assembled, position the hose out of pathways where people
might trip over it or in areas where the hose might be subject to
accidental damage.
WARNING
Asphyxiation Risk
• This gas appliance is for outdoor use in a well-ventilated space.
• This unit must not be installed inside an enclosed structure or
unvented appliance
CAUTION
Sharp Edges
Wear protective gloves and safety glasses during installation.
WARNING
Inspect appliance and components for damage. Damaged parts
may impair safe operation.
• Do NOT install damaged, incomplete, or substitute components.
Report damaged parts to your dealer.
Summary of Contents for ESF.2.B.G16
Page 27: ......
