ENGLISH
Burner Assembly - Natural Gas
NATURAL GAS
VERY IMPORTANT: Connection of this product to Natural Gas must
be completed by a licensed gas plumber / installer only. Do not
attempt to install this product with Natural Gas without a licensed
installer present.
1. Unpack burner box. Remove all items and check against the items
listed on page 9 of the manual to ensure all parts needed are ready.
2. THIS BURNER IS SHIPPED FOR PROPANE FUEL SOURCE. TO
CONVERT IT FOR NATURAL GAS, THERE ARE 2 ORIFICES THAT
NEED TO BE REPLACED WITH THE INCLUDED MARKED ORIFICES.
FOLLOW THE INSTRUCTION BELOW:
Conversion from Propane to Natural Gas
3. Locate the control valve.
3.Locate the control valve.
4. Using an 11mm wrench, remove low-rate bypass tube from the
control valve.
4. Using an 11mm wrench, remove low-rate bypass tube from the control valve.
5. With a flat blade screwdriver, remove the valve orifice (#52) and
replace with the natural gas orifice (#43).
5. With a flat blade screwdriver, remove the valve orifice (#52) and replace with the natural gas orifice (#43).
6. Re-install the low-rate bypass tube.
6.Re-install the low-rate bypass tube.
7. Remove the flare fitting adaptor from the valve gas input valve.
7. Remove the flare fitting adaptor from the valve gas input valve.
8. Turn the burner over so that the flexible hose is easily accessible.
8.Turn the burner over so that the flexible hose is easily accessible. Using adjustable wrenches, remove the burner flex line from the burner orifice
9. Using adjustable wrenches, remove the burner flex line from the
burner orifice. Remove the propane burner orifice installed in the
burner (#40) and replace with the included natural gas orifice (#29).
9. Remove the propane burner orifice installed in the burner (#40) and replace with the included natural gas orifice (#29).
Summary of Contents for ESF.2.B.G16
Page 27: ......
