-3-
1. General Information
1.1 Overview
Thanks for choosing
Econess Energy PV modules. In order to ensure the PV modules to be
installed correctly, please read the following operation instructions carefully before installing
and using the modules.
Please remember that the products would generate electricity and certain safety measures
need to be taken to avoid danger.
1.2 Applicable Products
This document is applicable to the series of solar module as listed below:
PV Modules with 6" Poly-crystalline Silicon Solar Cells:
72 cells: EN156P-72-xxx (xxx = 300 - 350, in increments of 5)
60 cells: EN156P-60-xxx (xxx = 250 - 290, in increments of 5)
54 cells: EN156P-54-xxx (xxx = 225 - 260, in increments of 5)
48 cells: EN156P-48-xxx (xxx = 200 - 230, in increments of 5)
36 cells: EN156P-36-xxx (xxx = 150 - 175, in increments of 5)
PV Modules with 6" Mono-crystalline Silicon Solar Cells:
72 cells: EN156M-72-xxx (xxx = 330 - 370, in increments of 5)
60 cells: EN156M-60-xxx (xxx = 275 - 305, in increments of 5)
54 cells: EN156M-54-xxx (xxx = 245 - 275, in increments of 5)
48 cells: EN156M-48-xxx (xxx = 220 - 245, in increments of 5)
36 cells: EN156M-36-xxx (xxx = 165 - 185, in increments of 5)
PV Modules with 6" Half-cut Poly-crystalline Silicon Solar Cells:
144 cells: EN156P-144-xxx (xxx = 300 - 355, in increments of 5)
120 cells: EN156P-120-xxx (xxx = 250 - 295, in increments of 5)
PV Modules with 6" Half-cut Mono-crystalline Silicon Solar Cells:
144 cells: EN156M-144-xxx (xxx = 345 - 395, in increments of 5)
120 cells: EN156M-120-xxx (xxx = 290 - 330, in increments of 5)
PV Modules with 6" Half-cut Mono-crystalline Silicon Solar Cells:
144 cells: EN158M-144-xxx (xxx = 360 - 395, in increments of 5)
120 cells: EN158M-120-xxx (xxx = 295 - 330, in increments of 5)
Make sure the array of modules installed with the Maximum permitted system voltage and
the rating current and voltage of the sub-equipments such as regulators and inverters. The
maximum permitted system voltage (DC) of the modules sold in Australia is 1500V
The modules are qualified for application class A, and modules qualified for safety through
IEC61730 within this application class are considered to meet the requirements of Safety
Class II
