Safety Instructions and Warranty Terms
3
Manual econ sens+
Version 1.40
minutes) for the last 13 months and per day for the last 10 years. No logging is performed if the time is not
valid.
Logs are stored after every interval. Average, minimum and maximum values are determined over the
interval. The interval is expressed in seconds and can be either 600s (10min) or 900s (15min).
Special features
For 2, 3, and 4-wire power systems with arbitrary load
Modbus TCP
2 x S0 pulse outputs for consumed and generated active energy or alternatively,
Modbus RTU (RS 485)
Acquisition of instantaneous values for U, I, P, Q and power factor per phase, together with
mean and cumulative values
Current range up to 3200 A / phase
No additional current transformer needed
Integrated web interface for configuration and fast and simple data acquisition
Quick installation, even during operation*
*
Please note!
In order to log the current strength, it is not necessary to switch off the consumer load that is to be measured, as the Rogowski
coils can be opened and wrapped round the conductor. When connecting the voltage path, the relevant safety regulations for
work on electrical systems must be observed!
Connections
Overview S0 model
Figure 1 shows the layout of the econ sens+ connections (S0 model)
Figure 1:
econ sens + connections (S0 model)
