background image

09

10

Do not store lithium-ion battery packs in a discharged state over a long 

period as this can damage the lithium-ion cells.

For long-term storage, store batteries in a high charge state disconnected.

The capacity of batteries will reduce over time. After 100 charge cycles, the 

battery

s operation time and the maximum torque performance of the 

driver will slightly reduce. This decline will continue until the battery has 

minimal capacity after 250 charge cycles. This is normal and not a fault 

with the battery pack.

When battery pack is not in use, keep it away from other metal objects, like 

paper clips, coins, keys, nails, screws or other small metal objects, that can 

make a connection from one terminal to another. Shorting the battery 

terminals together may cause burns or a fire.

Under abusive conditions,  liquid may be ejected from the battery; avoid 

contact. If contact accidentally occurs, flush with water. If liquid contacts 

eyes, additionally seek medical help. Liquid ejected from the battery may 

cause irritation or burns.

If the tool will not be used for long periods of time, charge the battery 

every 3-6 months.

08)

09)

10)

1 1 )

12)

13)

ADDITIONAL SAFETY NSTRUCTIONS FOR YOUR BATTERY 

CHARGER

Before charging, read the instructions.

For charging Li-ion battery packs only.

If the supply cord is damaged, it must be replaced by the manufacturer, its 

service agent or similarly qualified persons in order to avoid a hazard.

After charging, disconnect the battery charger from the supply mains. Then 

remove the chassis connection and then the battery connection.

Do not charge a leaking battery.

Do not use chargers for work other than those for which they are designed.

Before charging ensure your charger matches the local AC supply.

The charging device must be protected from moisture.

Do not use the charging device in the open.

Do not short out the contacts of battery or charger.

Respect the polarity"+/-"when charging.

Do not open the unit and keep out of the reach of children.

Do not charge the batteries of other manufactures or ill-suited models.

01.

02.

03.

04.

05.

06.

07.

08.

09.

10.

11.

12.

13.

Note: Normal charging time is approximately 7 minutes for a recently 

discharged 2. 0Ah capacity battery. However, if the Battery has been left 

in a discharged state for some time, it may take additional time to 

charge.

LED indicate

Nummer

1
2
3

Charger status

Charging
Finished charging
Battery failure

LED status

Red light

Green light

ON

OFF
OFF

OFF

ON

OFF

Remark battery operating temperature 0±3°  C<T<50±3°  C

NOTE: ABOUT BATTERY CHARGING:

The battery should be charged at ambient temperatures between 10 and 

40°  C. (ideally around 20°  C).

After discharging the battery, please wait 10 minutes for the battery to 

cool down before charging.

After charging, allow 15 minutes for the battery to cool before use.

Ensure that the charger is disconnected from the mains supply after use, 

and is stored correctly.

Do not leave batteries on charge for extended periods and never store 

batteries on charging.

The Battery Charger monitors battery temperature and voltage while 

charging. Remove the battery once charging is complete to maximise 

charge cycles of the battery and not waste power.

Batteries can become faulty over time, individual cells in the battery can 

fail and the battery could short. The charger will not charge faulty 

batteries. Use another battery if possible, to check correct functionality of 

the charger and purchase a replacement battery if a faulty battery is 

indicated.

01)

02)

03)

04)

05)

06)

07)

2. PUT IN THE BATTERY TO CHARGER

WARNING!

 Failure to follow the correct procedure when charging

batteries will result in permanent damage.

Summary of Contents for ELG06












Reviews: