2 zone RF wireless wall mounted touch dimmer remote
SR-2805T1
Parameter
Installation
Remote
Part No.
Operation Voltage
Output
SR-2805T1
12-24VDC/110-240VAC
RF Wireless Signal
RF Frequency
434MHz/868MHz
Wiring diagram
Product Size
2 zone
Back lighting for finding in the dark
Italian/ Australian, US wall mounted size available as wel l.
Touch sensitive
Glass interface
SR-2805T1(IT)
12-24VDC/110-240VAC
RF Wireless Signal
434MHz/868MHz
SR-2805T1(US)
12-24VDC/110-240VAC
RF Wireless Signal
434MHz/868MHz
86.0
86.0
80.0
120.0
120.0
75.0
SR-2805T1
SR-2805T1(IT)
SR-2805T1(US)
SR-2805T1
SR-2805T1(IT)
SR-2805T1(US)
Feature
This is a RF Wireless full touch wall mounted dimmer Remote 2 zones
Control distance
About 30m
About 30m
About 30m
2)Receiver Connection Diagram
1)Sender
Diagram
Connection
L
N
SR-2805T1-AC
110V-230VAC
N
L
Vin
GND
L
N
110V-230VAC
Power Supply
12-24VDC
SR-2805T1-DC
Part No.
Iuput Voltage
Remarks
Current
SR-2501N
12-36VDC
Constant voltage
4x(60-180)W
4x5A
Output
SR-2501NEA
12-36VDC
Constant voltage
4x(96-288)W
4x8A
Receiver
SR-2502N
12-36VDC
Constant current
4x(4.2-12.6)W
4x350mA
SR-2503N
12-36VDC
Constant current
4x(8.4-25.2)W
4x700mA
SR-2501NS
12-36VDC
Constant voltage
1x(96-288)W
1x8A
SR-2502NS
12-36VDC
Constant current
1x(4.2-12.6)W
1x350mA
SR-2503NS
12-36VDC
Constant current
1x(8.4-25.2)W
1x700mA
PUSH
Power Supply
12-36VDC
L
N
110V-230VAC
GND
SR-2501N
RF Easy Dimmer
1
2
3
4
Learning
Key
P
u
s
h
S
w
it
c
h
4x5A
Operation
Zone 1 Zone 2
On/dim up
Off/dim down
User manual when work with SR-2501/2/3N, SR-2501/2/3NS for single
color:
1. Pairing with remote: connect well receiver, short press learning key on
receiver,then immediately touch any of ,to assign the receiver in zone1
or zone2, the led light will flash, means well paired.
You can pair endless of receivers to any of the zones you want.
2. short touch to turn ON the light, long touch it to dim up brightness.
short touch to turn OFF the light, long touch it to dim down brightness.
3.if you want delete the receiver's learning data, just long press for 5
seconds the learning key on receiver, the reciever will be deleted the
learning, be set as factory defaults.
Think ahead ESC GmbH I Anzengruberstr. 39 I A-9020 Klagenfurt a. W. I T +43 (0)463 21 09 46 I [email protected] I www.think-ahead.at
