05
06
2. REMOVE THE BATTERY PACK
1）. Push and hold the battery release button.
2）. Remove the battery pack from the machine.
WARNING!
If the battery pack or charger is damaged, replace the
battery pack or the charger.
WARNING!
Stop the machine and wait until the motor stops before you
install or remove the battery pack
WARNING!
Read and understand the instructions in the battery and
charger manual.
3. START THE MACHINE
Turn on “4” and “6” at the same time, and the machine starts to run.
WARNING!
Hold the machine with hands during operation.
6
4
4. STOP THE MACHINE
Release the trigger(component 6)to stop the machine.
6
5. OPERATION WARNING
Do not put your fingers into the notches or in position where they can get cut
Do not touch the blade unless you remove the battery pack
Do not use the machine if the blade is damaged or bent
Remove all objects such as cords, lights, wire, or string which can become
entangled in the cutting blade and create a risk of personal injury.
WARNING!
If the blade jams on an electrical cord or line, DO NOT
TOUCH THE BLADE! IT CAN BE LIVE AND DANGEROUS. Do the steps
below:
Hold the insulated rear handle or put the machine down and away from
you.
Disconnect the electrically service to the damaged line or cord before you
try to free the blade.
01）
02）
OPERATION
WARNING!
Before any replacements, switch the tool off, wait for it to
come to a standstill, and take the battery out of the tool.
WARNING!
It is not necessary to assemble the machine.
1. INSTALL THE BATTERY PACK
1）. Align the lift ribs on the battery pack with the grooves in the battery com
-
partment.
2）. Push the battery pack into the battery compartment until the battery pack
locks into place.
3）. When you hear a click, the battery pack is installed.
