Ecom ECP2050, User Manual

Page: 46 / 64

ECP2050
46 / 64
Item Description
VRPL Voltage of pump reference sensor L.
VRPH Voltage of pump reference sensor H.
VSBL Voltage of box measuring sensor L.
VSBH Voltage of box measuring sensor H.
VRBL Voltage of box reference sensor L.
VRBH Voltage of box reference sensor H.
CNTD Countdown to current status change L/H, H/L (Countdown).
HEAT Sensor heating
– YES = heating (current High); NO = cooling- (current Low).
SPLK Pump leakage sensor YES/NO.
SBLK Box leakage sensor YES/NO.
6.6.7. Pump
Displays status of pump mechanism. Units for pressure are stated in upper row.
S
TATUS OF
P
UMP
M
ECHANISM
Item Description
PACT Actual pressure.
PAVG Middle pressure during one cycle.
PULS
Pressure pulsation (bandwidth
PMAX
–
PMIN
) per one cycle.
DEAD Status of optical switch detecting position of top dead center of main (left)
piston
– CLOSE/OPEN.
MAGV Motor load mean value (% of maximum allowed load).
MMAX Motor load peak value (% of maximum allowed load).
CAMR Camshaft speed (rotations per minute).
PPOS Piston actual position.
6.6.8. Solvents
On main screen is displayed
SOLV
. In this menu item is displayed actual volume of residual
mobile phase (solvents).
6.6.9. Pulsation
On main screen is displayed
PULS
. In this menu item is displayed status of pump pulsation.
Units for pressure are stated in upper row.
P
UMP
P
ULSATION
S
TATUS
Item Description
PU01 Pulsation during last rotation.
PUAN Average pulsation in n rotations, n is determined by firmware based on
actual flowrate.
PUBT Best reached pulsation during learning process.
PULI Pressure pulsation limit.
PAVG Average pressure in one rotation.