Ecom ECP2050, User Manual

Page: 35 / 64

ECP2050
35 / 64
Setting Description
COPY Copying program to following positions.
Press key
ENTER
to enter an item. Use cursor to set number of position
Y. EMPTY
. Press
ENTER
again to start copying and this screen is
automatically left back to edited program
X. S(xx)
.
Y. EMPTY
changes to
Y. S(xx).
DELETE Deleting content of edited program.
After pressing
ENTER
a menu is displayed with a question, whether to
delete YES by pressing
ENTER
or NO by pressing
ESC.
After confirming
YES, we stay in currently edited program, then it is saved and
X. S(xx)
changes to
EMPTY.
Note: Steps with same time are lined in order, as they were created.
W
ORKING WITH
S
TEPS IN
M
ENU
I
TEM
TIME TABLE
Action Description
Adding new step Use arrow down from last step.
Adding new step
between existing
steps
1) Create new step
– start time of step, flowrate, concentration in % (see
table above).
2) Exit TIME TABLE
– ESC.
3) Controlling alterations made
– enter
TIME TABLE . New step is enlisted
on its position in time axis of step beginnings.
Deleting step
1) Choose step X . for deletion.
2) Adjust start time of step
–
mm:ss to 00:00
– ENTER – step remains in
the list on the same position.
3) Exit TIME TABLE
– ESC.
4) Controlling alterations made
– enter TIME TABLE. Step
X . is deleted.
Moving step 1) Choose step X . that should be moved.
2) Adjust start time of step
X
to desired time
–
ENTER
– step remains in
the list on the same position.
3) Exit TIME TABLE
– ESC.
4) Controlling alterations made
– enter
TIME TABLE . Step X . is moved to
its position in time axis of step beginnings.
Step change of
concentration
1) Create new step
– start time of the step is equal to start time of
previous step. Value of flowrate remains the same or is different from
previous step. Enter desired concentration.
e.g.: A 100% changes to 0%, B 0% changes to 100%, C, D are closed.
2) Save.