EcoFoot5D Install Guide V1.1-FINAL
Page 10 of 19
January 25, 2018, ES10560
ecolibriumsolar.com
Step 5 – Install Ballast Tray and place ballast blocks on Tray.
5.1
Slide tray into retention clips located on the Base by sliding the Tray along the east-west direction.
5.2
Secure tray to Mid-Support using 5/16” thread forming screw provided with Mid-Support Kit.
Torque Screw to 14 ft-lbs.
5.3
Place ballast (not included) in a single layer evenly dispersed along the length of Ballast Trays. Apply
ballast per the ballast plan specified in the PE Certified Ballast Plan – Sheet S-1.0.
Step 6 – Install Wind Deflector.
6.1
Place Wind Deflectors into slot on EcoFoot5D Base and attach to Rocker using Nut provided.
6.2
Torque Nut to 14 ft-lbs using a ½” deep socket.
Application of anti-seize on threaded post recommended.
Ballast Tray
Base
Retention
Clips
Ballast Tray
5/16” Screw
Rocker
Nut
Base
Retention
Clip
Wind Deflector
