28
Adjust Dispensing: Door Probe
Adjust Detergent
Adjust Rinse Aid
Adjust Third Product
1
1
Adjust Detergent
Adjust Rinse Aid
Adjust Third Product
Back
01
Adjust Detergent
Adjust Rinse Aid
Adjust Third Product
Back
1
Adjust Detergent
Adjust Rinse Aid
Adjust Third Product
Back
Logout
Adjust Dispensing
Diagnostics & Troubleshooting
Setup System
View Information
Set detergent concentration:
Range: 1-100, increments of 1
Default: 50
Titrate machine sump to determine concentration.
Use Probe Diagnostics to determine when machine is at set point.
Machine is at set point when Temperature Compensated Value
equals Detergent Set Point.
See “Diagnostics & Troubleshooting --> Probe Diagnostics”
Adjust Detergent Set Point
50
Set the rinse pump speed:
Range: 8-30RPM, increments of 0.5RPM
Adjust Rinse Pump Speed
Adjust Rinse Pump Limit
Adjust Rinse Start Delay
Rinse Pump Prime
15.0 RPM
Set the third product pump speed:
Range: 8-30RPM, increments of 0.5RPM
Default: 15RPM
Adjust Third Product Pump Speed
Adjust Third Product Pump Limit
Adjust Third Product Pump Start Delay
15.0 RPM
Set the rinse aid pump run time limit per rack:
Range: 0-50 seconds, increments of 1 second
Default: 15 seconds
Adjust Rinse Pump Speed
Adjust Rinse Pump Limit
Adjust Rinse Start Delay
Rinse Pump Prime
15 Seconds
Set the third product pump run time limit per rack:
Range: 0-50 seconds, increments of 1 second
Default: 15 seconds
Default product selection: None
Adjust Third Product Pump Speed
Adjust Third Product Pump Limit
Adjust Third Product Pump Start Delay
15 Seconds
Set the delay time for starting the rinse pump after receiving
a rinse signal:
Range: 0-30 second, interval 1 second
Default: 2 seconds
Adjust Rinse Pump Speed
Adjust Rinse Pump Limit
Adjust Rinse Start Delay
Rinse Pump Prime
2 Seconds
Set the delay time for starting the third product pump after
receiving a rinse signal:
Range: 0-30 second, interval 1 second
Default: 2 seconds
Adjust Third Product Pump Speed
Adjust Third Product Pump Limit
Adjust Third Product Pump Start Delay
2 Seconds
Adjust Rinse Pump Speed
Adjust Rinse Pump Limit
Adjust Rinse Start Delay
Rinse Pump Prime
Prime the rinse line for 30 seconds at the programmed
Rinse Pump Speed.
Press start to begin priming
Summary of Contents for 9223-1070
Page 21: ...19 v Alarm Priority...
