ECOFOREST ecoSMART e-system, User Manual

Page: 7 / 23

User manual ecoSMART e-system
5
EN
Control of electrical surplus.
The ecoSMART e-system is able to determine when we are facing an energy surplus situation. In this case, and under a series of
configurable conditions for the beginning and end of the regulation, the control will adjust the consumption of the heat pump to take
advantage of this surplus in the production and storage of thermal energy, so that it is obtained with less consumption when the
electricity production from renewable sources falls.
Consumption control through heat pump regulation.
When the electrical consumption of your installation approaches a maximum value that can be configured by the installer, the heat
pump can limit its power to try to keep total consumption below the limit.
Control of non-critical loads.
It is possible to program the activation and deactivation of up to four non-critical loads by enabling four output relays supplied at
230V, configuring a series of parameters associated with the energy balance between the electrical grid and the consumption of the
installation.
Battery electrical storage
The ecoSMART e-system manages the charge and discharge of a bank of lithium-ion batteries of up to 12kWh capacity, which allows
to accumulate part of the surplus to supply the electrical consumption of your home when there is no production or to charge the
batteries from the grid when the energy is cheaper. As it is a modular system, you can adapt the capacity of the bank to your particular
needs.
“ P lug&play” system.
The ecoSMART e-system integrates all the necessary elements for the start-up and correct operation of a photovoltaic self-
consumption system (with the exception of the PV modules) inside the case, which reduces costs, minimises the space required and
facilitates its installation.
Smart, versatile and intuitive management.
The system continuously monitor the operation of the installation and alerts us if there are any problems. The application interface
allows to easily visualise and control the functions of the
e-system .