User manual
ecoSMART e-system
10
EN
3.7.
Parameters adjustment
Take the following steps to change a parameter:
1.
Search for the screen containing the parameter that needs adjusting (figure 5.4).
2.
With the cursor in position 1 press on
to enter the screen and move the cursor to the parameter in position 2.
3.
Adjust the parameter in position 2 using buttons
.
4.
Press
to accept and move the cursor to position 3.
5.
Adjust the parameter in position 3 with buttons
.
6.
Press
to accept and return to position 1.
7.
With the cursor in position 1 again, press buttons
to go to the previous or next screen, or
to return to the list of
user menus.
Figure 3.4.
Adjusting comfort parameters
3.8.
ON/OFF Menu
On/Off
Shows the unit address.
Used to switch the energy manager on / off or to activate the EMERGENCY status.
3.9.
SCHEDULE Menu
Date/Time
This is used to adjust the day of the week, date (DD/MM/YY) and time (HH:MM 24-hour
format) of the controller.
4:5
User menu
/7
On/Off
Date and hour
Surplus control
/8
On/Off
Unit address:
State:
4:5
User menu
/7
On/Off
Date and hour
Surplus control
/8
Date/Hour
Day:
Monday
Date:
//5
Hour:
7:5
DHW set
Enable:
SetT:
Position 2
Position 3
Position 1
Summary of Contents for ecoSMART e-system
