24
Programming the Water Softener
Auxiliary control
97% feature
Service reminder
Special features
FIG. 84
Service reminder
12 months
0 days
FIG. 85
SERVICE REMINDER (set / reset)
Use this feature to program the number of months (up
to 24) before a “Service overdue” message will appear
instead of the rolling status screens (See Figure 83).
8
. Press the UP (
5
) or DOWN (
6
) buttons to set the
number of months until the service reminder
appears. Repeatedly pressing the DOWN (
6
) but-
ton until the display reads “Off” turns this feature off
and zeros the number of months and days.
9
. Press the SELECT (
¡
) button. The display will go
back to the Special features menu (Figure 84).
10
. Press the LEFT (
3
) button three times to return to
the rolling status screens.
6
. Press the DOWN (
6
) button to scroll through the
menu options until
Service reminder
is highlighted.
7
. Press the SELECT (
¡
) button to display the Service
reminder screen (See Figure 85).
This will be a reminder to call your dealer for service.
Once programmed, this feature displays the number of
months and days left until the service reminder.
Once the “Service overdue” message has appeared,
dealers performing service clear it by setting the num-
ber of months until the next service reminder. Set or
reset the service reminder as follows:
1
. From any of the rolling status screens, press the
SELECT (
¡
) button to display the
Main menu
.
2
. Press the DOWN (
6
) button to scroll through the
menu options until
Advanced settings
is highlighted.
3
. Press the SELECT (
¡
) button to display the
Advanced settings menu.
4
. Press the DOWN (
6
) button to scroll through the
menu options until
Special features
is highlighted.
Service reminder
Service overdue
FIG. 83
5
. Press the SELECT (
¡
) button to display the Special
features menu (See Figure 84).
FIG. 86
120V AC
60 Hz
Power
Supply
24V DC
Power In
Aux.
Out
Valve
Motor
Turbine
Sensor
Position
Switch
GND
+5
OUT
NO
C
1
Brown
Green
White
Red
Black
Red
Black
Control Board on
Back of Faceplate
24V DC
Auxiliary Output
WIRING SCHEMATIC
+
–
