5
Expansions
6. Remove the external power cable for the ecoBatterySystem.
DANGER
Voltage
An electric shock can lead to severe physical injury or death.
•
Make sure there is no power to the cable before you remove it.
7. Remove the screws on the top and bottom of the control plate.
8. To be carried out by two people: Remove the control plate and carefully set it aside (DO NOT
lay it down) so that it does not get damaged.
9. If the cables are too short:
DANGER
Voltage
An electric shock can lead to severe physical injury or death.
•
Make sure there is no power to the cable before you remove it.
°
Remove the inverter AC cables (note the sequence).
°
Remove the inverter AC cables from the cable duct and cut off the lower cable tie.
°
Place the spiral hose and cables to one side (in the cabinet if necessary).
10. With the
ecoBatterySystemLarge,
switch off every inverter individually.
With the
ecoBatterySystemSmall,
the switch-off will happen automatically when the
ecoBatteryModule is turned off.
11. Fit the rails (clearance: 8 slots (117 mm) down to the tightened screw at the bottom).
30
TM_ecoBatterySystem_2.2_en-UK
