Installation
Mounting panels using S roof mounting pads
Magen eco-Spark
®
Installation manual. © 2012, all rights reserved
P a g e
|
26
5
Screw the Top S Mounting pads to
the profile.
6
Thread the bottom S Mounting pads into
the headers and connect them to the profile.
Pay attention to the ambient temperature
and position the slider over the track and
grid closest to the graphic mark that best
describes the weather accurately.
8
In windy regions add strength to the
installation by screwing down the binders to
another metal/wooden profile.
7
Each graphic mark on the bottom S
roof mounting pad refers to a possible
weather condition: "snowflake" for
cold and "heat waves" for hot. During
installation the ambient temperature
should be considered. Position the slider
part over the track (and the grid), so it is
closer to the icon that best defines the
weather. This will allow enough room for
the system to expand and contract as
needed.
9
Once all mounting pads
are properly lagged
to the rack or roof surface, and all the collectors
are hung in place, join the upper headers
together with PPC connectors as described in
page 21.
