Eco Engineering Easypell 16, Installation Manual

Page: 53 / 64

Appendix
53
114 4
Appendix
14.1 Checklist for checking the heating system
The checklist is intended to help authorised specialists perform and document a comprehensive check on the
heating system.
Name and adress of the customer Heating device
Name:
Type of boiler:
Street: Rated power:
Place: Year of build:
Name and adress of the seller
Manufacturer’s serial number:
Name:
Type of heating controller:
Street: Type of accumulator:
Place: Solar device:
D Da am ma ag ge e tto o p prro op pe errtty y
Use the checklist to check the heating system before
starting up for the first time.
CHECKLIST Yes Comment
Pellet boiler
Burner plate Is the screw fixing the burner plate, tightened?
Flame tube
Is the flame tube placed correctly?
Combustion chamber
cover
Are the adjusting screws for the increasing of the flue gas
temperature adjusted correctly?
Flue gas connection Is the connection line insulatet?
Is a chimney draft regulator, barometric damper
implemented?
Airation/boiler room
Exists the required aeration opening?
Nameplate Is the nameplate placed on the boiler?
Electric installation and regulation
Power supply
Check the electrical connection
Check the dimensions of the fuses.
Boiler sensor Securing location and connection
Hydraulic Connection
Circuit pumps
Check the switch on temperature (min. 60°C )
Boiler connection Is the pellet boiler correctly connected (flow and return)?
Is the hydraulic system deaerated?
Is the system filled up with water?
Check the pressure.
Safety systems
Installation Manual Easypell 16 — 32kW