Eco Engineering Easypell 16, Installation Manual

Page: 40 / 64

40
Status display
112 2..11..5 5 S Stta attu us s d diis sp plla ay y
The current status is displayed.
No settings can be entered.
This display is for information only.
Pressing the button repeatedly returns you to the start screen.
Status display symbols:
Display Description
DHW priority active (heating circuit demand is subordinate).
Pump output active.
Minimum boiler temperature (pump release) has not been reached.
Time program active.
Burner demand via burner contact / thermostat.
Warning
12.2 Version B
Heating circuits and domestic hot water are controlled by an external controller.
The boiler controller features a "burner contact" for this purpose at terminal 7/8 (24V).
If this burner contact is closed, the burner starts.
The boiler switches to standby mode when the switch-off temperature is reached.
The boiler switch-off temperature is set at the factory to 76° C.
When the actual boiler temperature falls to 10 °C below the boiler switch-off temperature, the burner restarts.
It must be ensured that both the heating circuit pumps
and the hot water pump are only switched on when an
actual boiler temperature of 60 °C has been reached.
This prevents the formation of condensate in the com-
bustion chamber.
Note:
Non-compliance with this requirement leads to guarantee and warranty forfeiture!
200014_EN 1.2