Eco Engineering Easypell 16, Installation Manual

Page: 13 / 64

Bringing the pellet boiler into the central heating room
13
6 6
Bringing the pellet boiler into the central heating
room
This section describes the prerequisites as well as the working sequence required.
1.
Transport
2.
Notes on bringing the unit into the building
3.
Casing parts
4.
Dismantling the casing parts
6.1 Transport
Maine Energy Systems supplies the pellet boiler on a pallet. The pellet boiler is ready to be connected.
The control unit for the boiler controller is integrated into the control panel.
If it is not possible to bring the boiler into the building at ground level, remove the casing, the burner, the boi-
ler controller and the pellet hopper. This will reduce the weight of the unit and make it easier to carry.
C Co on ntta am miin na attiio on n a an nd d c co orrrro ossiio on n
Make sure that the pellet boiler is located under a roof if
it needs to be stored outside before it is transported/
brought into the building.
Installation Manual Easypell 16 — 32kW