8
Safety Precautions
Anyone operating the machine should read the
following carefully and be informed of potentially
dangerous operating conditions. Operators should
be familiar with the location and use of all safety
devices on the machine. DO NOT use the machine
if it is not in proper operating condition, and report
any damage or operation faults immediately.
DANGER!
This machine has parts including the pad/
brush assemblies that can cause severe injury if these
parts are contacted while they are moving.
DO NOT
allow any part of the body or clothing to come in contact
with these parts while they are moving.
DO NOT
try to
change the pads/brushes while the machine is running.
DO NOT
allow other people to come near the machine
while it is in operation.
DO NOT
allow the machine to
run unattended.
DO NOT
leave the machine in a place
where unauthorized or untrained personnel could use
the machine.
DO NOT
run the machine with the pads/
brushes off center, damaged or missing.
DO NOT
operate the machine if the machine has loose parts.
WARNING!
Batteries emit hydrogen gas. Explosion or
fire can result. Keep sparks and open flame away. Keep
covers open when charging.
DO NOT
smoke around
batteries. Avoid skin contact with the acid contained in
the batteries. Never allow metal objects to lay across
battery tops.
WARNING!
Operate from the rear of the machine only.
WARNING!
Inspect pad holders regularly. A fractured pad
holder may result in pad fragments causing injury.
WARNING!
Use caution when operating the machine on
a ramp or incline.
DO NOT
turn the machine, or leave it
unattended, on a ramp or incline.
WARNING!
Store machine inside. Keep the electrical
components of the machine dry.
DO NOT PRESSURE
WASH MACHINE
.
WARNING!
Modifications or alterations to this machine
can lead to personal injury or damage to the machine.
DO NOT
make unauthorized modifications or alterations
to this machine. Amano Pioneer Eclipse assumes
no liabilities for injury or damage resulting from an
unauthorized modification or alteration to the machine.
Any unauthorized modification or alteration to this
machine voids all warranties.
WARNING!
The motor and motor controller become hot
enough while the machine is in operation, and for a
long time after the machine is shut off, to cause severe
burns.
DO NOT
touch these parts of the machine until
they have cooled.
WARNING!
Injury can occur to the eyes and body while
using the machine. Safety goggles, safety shoes, and
safety clothing are recommended while operating the
machine.
WARNING!
Machine vibration may cause tingling
or numbness in the fingers or hands. Gloves are
recommended to reduce machine vibration. If tingling or
numbness persists, shut off the machine. If the vibration
is caused by loose parts such as an off center pad/
brush, adjust or tighten these parts before using the
machine again.
WARNING!
DO NOT
burnish on an incline. This machine
is designed to burnish on a flat level floor.
CAUTION!
DO NOT
operate machine unless trained and
authorized.
DO NOT
operate machine unless you have
read and understand the operation manual.
DO NOT
operate machine in flammable or explosive areas.
CAUTION!
Before starting machine ensure all safety
devices are in place and functioning properly. Before
starting machine check for proper operation.
CAUTION!
When using machine, go slowly on inclines
or slippery surfaces. Use care when operating machine
in reverse. Follow all manufacturers instructions on
chemical product containers when handling, mixing, or
using chemical products.
CAUTION!
When servicing machine, stay clear of
moving parts.
DO NOT
wear loose clothing when
working on machine. Block machine wheels before
raising or jacking up machine. Use hoist stands that
will support the weight of the machine. Wear eye and
ear protection when using pressurized air. Disconnect
battery connections before servicing machine. Use only
replacement parts supplied by Amano Pioneer Eclipse
or a Amano Pioneer Eclipse Authorized Distributor or
Service Center.
Summary of Contents for PE300BU
