Eclipse PE300BU, Operator'S Manual

Page: 13 / 44

13
300BU Traction Model
1. Key Switch - Turns the machine on/off.
2.
Handle Lever
- When the lever is engaged the
machine will move forward. If the Burnish switch is
on, the pad will also start turning. If the burnish head
is tilted up into the pad change position, the burnish
motor will not engage.
NOTE: The machine needs to be moving when the
burnish switch is turned on or off in order to keep from
burning the floor.
3.
Burnish Switch
- Turns burnish function on/off. The
burnish motor will not engage unless the burnish
switch is on and the handle lever is engaged. If the
burnish head is tilted up into the pad change position,
the burnish motor will not engage.
4. Reverse Switch - Hold down this switch while the
handle lever is engaged and the machine will move
in reverse. Once the reverse switch is released the
machine will start moving forward.
5.
Traction Speed Control
- Turn the knob clockwise to
increase speed. Turn the knob counter-clockwise to
decrease speed.
6. Hour Meter / Battery Discharge Indicator - The
LCD displays the number of burnishing hours. The
machine will only count hours while burnishing. The
row of LEDs display the charge level of the battery
pack. When all the yellow LEDs are lit, the battery
pack is fully charged. In order to protect the battery
pack, when the red LED is lit, the burnish motor will
stop and the machine should be recharged.
7.
Alarm LED
- Displays trouble codes as a blink
pattern. In normal operation this LED will be off. If it
comes on, refer to the troubleshooting section.
Over Current Protection
1. 70A Breaker - Over current protection for the burnish
motor. Push to reset.
2. 40A Breaker - Over current protection for the traction
drive. Push to reset.
3. 3A Fuse In-Line holder - Over current protection for
key switch.