5
Eclipse ExtensoHeat Lance Burners, V1, Installation Guide 235, 5/23/2011
Safety
Introduction
In this section, you will find important notices about safe
operation of a burner system. Read this entire manual
before you attempt to start the system.
Safety
■
The burners covered in this manual are designed
to mix fuel with air and burn the resulting mixture.
All fuel burning devices are capable of producing
fires and explosions when improperly applied,
installed, adjusted, controlled or maintained.
■
Do not bypass any safety feature. Fires and
explosions can be caused.
■
Never try to light the burner if the burner shows
signs of damage or malfunctioning.
■
The burner and duct sections might have HOT
surfaces. Always wear protective clothing when
approaching the burner.
■
This manual provides information in the use of
these burners for their specific design purpose. Do
not deviate from any instructions or application
limits described herein without written advice from
Eclipse.
■
Read this entire manual before you attempt to start
the system. If you do not understand any part of
the information in this manualm contact your
Eclipse representative or the Eclipse factory
before you continue.
Capabilities
Adjustment, maintenance and troubleshooting of the
mechanical and electrical parts of this system should be
done by qualified personnel with good mechanical
aptitude and experience with combustion equipment.
Operator Training
The best safety precaution is an alert and trained
operator. Thoroughly instruct new operators so they
demonstrate an adequate understanding of the
equipment and its operation. A regular retraining schedule
should be administered to ensure operators maintain a
high degree of proficiency.
Replacement Parts
Order replacement parts from Eclipse only. All Eclipse
approved, customer supplied valves or switches should
carry UL, FM, CSA, CGA, and/or CE approval where
applicable.
DANGER
WARNING
NOTICE
2
