Using The Ego
As both the
TIMER
and the
SHOTS
options from the
DISPLAY
Menu are covered in their respective sections in the
following pages we will start by looking at the Rate of
Fire option.
The Rate of Fire
(ROF)
option is a means by which you
can monitor your rate of fire whilst using the Eclipse
Ego. The Rate of Fire screen looks like the screen to
the left.
With the Break Beam Sensor System enabled and
paint present, the rate of fire is only limited to the speed
of your loader. To achieve the highest rates of fire we
recommend using a high-speed loader such as the
HALO, Evolution 2 or Q-loader. With the Break Beam
Sensor System enabled, and no paint present, the rate
of fire will be 0, as your Eclipse Ego will not be able to
fire.
To use the Rate of Fire screen without shooting paint,
simply switch the Break Beam Sensor System off using
the
Raise
pushbutton. In this scenario, the Rate of Fire is
only limited to whatever value you have selected in the
MAX ROF
option in the
TIMING
Menu.
The Rate of Fire Indicator records every pull and
release of the trigger over a period of one second and
calculates the number of valid shots that were fired
during that period.
The current Rate of Fire is displayed in the top right
hand corner. The maximum Rate of Fire that has been
achieved is displayed in the bottom right hand corner.
To reset the maximum Rate of Fire simply push and
hold the
Lower
pushbutton for a 1 second period.
Using the Display Menu Rate of Fire Option
Battery Level Indicator
Maximum Rate of Fire Achieved
Current Rate of Fire
Break Beam Sensor System Indicator
Using The Ego
Using The Ego
22
23
