Eclipse CD8053 Owner'S Manual Download Page 99

Page: 99 / 132

How to use the NOB remote control

[MUTE] button

Cutting the volume instantly (muting)

Press the [MUTE] button for more than one second to cut the
volume or restore it instantly.

ATTENTION

Press the [MUTE] button for more than one second if E-COM is
connected and less than one second if E-COM is not connected
to cut the volume or restore it instantly.

[PWR] button

Remote-control
light receptor

[AUDIO
CONTROL]
button

Turning the power on/off

Press the [PWR] button.

The power turns on or off each time the button is pressed.

When the power is turned on, the state used when the power was
turned off such as CD and tuner playing is restored.

Adjusting the audio volume

Press the [AUDIO CONTROL] button, and turn it to the
left or right.

Each press of the button will switch the audio control modes.
Turn to the right: Increases the volume.
Turn to the left:

Decreases the volume.

ATTENTION

When the main unit is shut down, the remote control will not work.

Summary of Contents for CD8053





































































































































Search results

Summary of Contents for CD8053

Reviews:

Related manuals for CD8053

Brands by name

Popular brands

Eclipse CD8053, Owner'S Manual

Search results

Summary of Contents for CD8053

Reviews:

Related manuals for CD8053

Brands by name

Popular brands