Eclipse CD8053 Owner'S Manual Download Page 86

Page: 86 / 132

How to operate the Sound Adjustment Mode

Operations during Pro Mode

Turn the [SEL] button to select a setting item.

When the button is turned, the setting item changes in the
following order and the selected item is highlighted.

Press the [SOUND] button for less than one second.

The mode will switch to sound adjustment mode.

Press the [SOUND] button for more than two seconds.

The mode switches between normal mode and pro mode each
time the button is pressed. During pro mode, "PRO MODE ON"
and the scroll display appear in the display.

*: This is displayed only if E-COM is connected.

[SEL]
button

PEQ

Time Alignment

X-Over

MP3 Harmonizer*

Non-F Phase

[SOUND] button

ATTENTION

•If the vehicle is equipped with a 3-way speaker system, do not

change from pro mode to normal mode. Doing so may cause
damage to the speakers.

•If you press the [SOUND] button during sound adjustment

mode, the adjustment mode is canceled and the mode returns
to normal music mode.

Summary of Contents for CD8053





































































































































Search results

Summary of Contents for CD8053

Reviews:

Related manuals for CD8053

Brands by name

Popular brands

Eclipse CD8053, Owner'S Manual

Search results

Summary of Contents for CD8053

Reviews:

Related manuals for CD8053

Brands by name

Popular brands