manualshive.com logo in svg

Eclipse CD8053, Owner'S Manual, Page: 94 / 132

Share
Download
Eclipse CD8053 Owner'S Manual Download Page 94

94

How to operate the Sound Adjustment Mode

This adjustment is for 3-way speaker system which uses
different speakers for different ranges (treble range: tweeters,
medium range: Mid, bass range: woofers). In this case, the
crossover function applies the HPF to the treble-range
speakers, it applies the HPF and LPF to the medium-range
speakers, and it applies the LPF to the bass-range speakers to
adjust the respective playback ranges so that the sounds from
all speakers merge properly.

Turn the [SEL] button to select X-Over.

The selected item will be highlighted.

Press the [SEL] button.

The mode will change to crossover adjustment mode.

Press the [SEL] button to select the crossover adjustment
channel.

Each time the button is pressed, the selection changes in
the following order.
Hi 

➔

M-LPF 

➔

M-HPF 

➔

Low 

➔

Turn the [SEL] button to select the cut-off frequency.

When the button is turned, the frequency changes in the
following order.

Hi / M-LPF:
200Hz 

↔

250Hz 

↔

315Hz 

↔

400Hz 

↔

500Hz 

↔

630Hz 

↔

800Hz 

↔

1kHz 

↔

1.25kHz 

↔

1.6kHz 

↔

2kHz 

↔

2.5kHz 

↔

3.15kHz 

↔

4kHz 

↔

5kHz 

↔

6.3kHz 

↔

8kHz 

↔

10kHz 

M-HPF / Low:
63Hz 

↔

80Hz 

↔

100Hz 

↔

125Hz 

↔

160Hz 

↔

200Hz 

4

3

2

1

CROSSOVER ADJUSTMENT (X-Over)

[SEL]
button

Summary of Contents for CD8053





































































































































Reviews:

No comments