background image

3

1 Introduction

1.1  Range of application

The Micromag HP/80NPT follows on from the standard Micromag family and has all the same 
incredible benefits. The unit was developed to suit high pressure/temperature applications.

Micromag HP/80NPT can be installed anywhere in the fluid delivery system and can remove 
sub-micron magnetic and para-magnetic particles.

For further information relating to the standard benefits and operation please refer to the 
downloadable Micromag brochure on our website – 

www.eclipsemagnetics.com

/na

 in 

the ‘Magnetic Filtration’ section. 

Pressure rating

 – Standard filter is designed and tested to operate at 1160 psi (80 bar) max. 

line pressure.

DO NOT USE IN EXPLOSIVE ATMOSPHERE UNLESS 

ORDERED AS AN ATEX APPROVED PRODUCT!

1.2  Used symbols 

 

 

Important notes

 

 

Danger notes

 

 

Safety notes

Contents

 

1 Introduction

  1.1 Range of application 

3

  1.2 Used symbols 

3

  1.3 Overview 

4

 

2 Technical data

  2.1 Performance data 

5

  2.2 Noise data sheet 

5

 

3 Design and method of operation

  3.1 Method of operation 

6

  3.2 Construction 

6

 

4 Safety

  4.1 Intended use 

7

  4.2 General preventive measures 

7

  4.3 Dangers of not adhering to safety notes 

7

  4.4 Safety notes for operation and maintenance 

7

  4.5 Notes on residual risks 

8

  4.6 Consequences with arbitrary change 

8

  4.7 Prohibited operation 

8

 

5 Installation and use

  5.1 Mechanical installation  

9

  5.2 Connections 

9

  5.3 Setting of the operating parameter 

9

  5.4 Cleaning 

10

 

6 Maintenance

  6.1 General notes 

10

 

7 Spare parts/service

  7.1 Spare parts list 

11

  7.2 Service address 

11

 

8 Shipping, preservation, waste  

 

 disposal, transport, storage

  8.1 Shipping, preservation, waste disposal 

12

  8.2 Transport 

14

  8.3 Storage 

15

Summary of Contents for Micromag HP/80NPT









Reviews: