EC-PM-530B User's Manual
- 56 -
The default settings of baud rate and data configuration in serial connecting way are 9600bps, 8 bits,
parity check disabled and 1 stop bit.
EC-PM-530B printer’s serial interface can be connected with the standard RS-232C interface. When
connecting with a PC, the connecting picture is shown as Figure 5-7. While connecting with an IBM PC
or a compatible PC, you can connect the cable as shown in Figure 5-8.
The connection of serial interface:
5.2.5 Ethernet Interface
10/100Base-T Ethernet interface can connect to 10/100M Ethernet.
5.2.6 Power Supply Inlet
EC-PM-530B printer connects with AC adapter of 24V±10% and 2.5A. The power supply inlet is
shown as Figure 5-10.
Figure 5-9 Ethernet interface
Figure 5-8 The connection figure of
host
25 PIN
and printer
Figure 5-7 The connection figure of
host
9 PIN
and printer
Printer 9PIN connector
Host 25PIN connector
DTR
CTS
GND
TXD
RXD
DSR
DCD
CTS
RTS
GND
RXD
TXD
4
8
5
3
2
6
8
5
4
7
3
2
Printer 9-Pin connector
Host 9-Pin connector
DTR
CTS
GND
TXD
RXD
DSR
DCD
CTS
RTS
GND
RXD
TXD
4
8
5
3
2
6
1
8
7
5
2
3
Note:
①
“From” means the source where signal comes out.
②
The logical level of signal is EIA level.
EC Electronics, Ltd.
www.eclinepos.com
EC Electronics, Ltd
No. 221 Wai Yip Street, Kwun Tong
Kowloon, Hong Kong
TEL : (852) 3590 6397
FAX : (852) 3590 6497
E-MAIL : [email protected]
