EC-PM-530B User's Manual
- 5 -
2.3.4 Connecting the Serial Cable
1. Make sure that the computer and the printer are both turned off, connect the serial cable to the
serial interface of the printer and tighten the screws on both sides to make the cable fixed. (As
shown in Figure 2-5)
2. Connect the other end of the cable to the computer’s serial interface and tighten the screws on
both sides to make the cable fixed.
2.3.5 Connecting the Ethernet Cable
Plug the crystal end of the Ethernet cable (RJ-45) into the printer’s Ethernet interface, and then, plug
the other end into the LAN’s entrance. (Shown as figure 2-6)
Figure 2-4 Connecting the USB cable
Figure 2-5 Connecting the serial cable
Figure 2-6 Connecting the Ethernet Cable
USB cable
USB Interface
Serial Cable
Serial Interface
Screw
Ethernet Cable
Ethernet Interface
EC Electronics, Ltd.
www.eclinepos.com
EC Electronics, Ltd
No. 221 Wai Yip Street, Kwun Tong
Kowloon, Hong Kong
TEL : (852) 3590 6397
FAX : (852) 3590 6497
E-MAIL : [email protected]
