38
For example:
1.
80000004: HD 720p60
2.
81000061: WXGA 1366x768@60
3.
81000040: WXGA+ 1440x900@60
4.
81000051: WUXGA 1920x1200@60
5.
8100003C: SXGA+ 1400x1050@60
…
Timeout for Detecting Video Lost:
Setup the time for stopping the video on the output
after detecting that the transmitter HDMI signal has been lost.
10.4.2. Setup Scalar Output Mode for Transmitter
On the Transmitter Function page, it is possible to select the Maximum bitrate for the
generated stream.
It is possible to fix the stream bitrate to value from 10 to 200 Mbps with a Best Effort
option that optimize the bitrate accordingly with the video input.
10.4.3. USB over IP
This section allows to select the USB extension options.
Enable USB over IP:
Check it to enable USB extension mode over IP
Operation Mode:
o
Auto select mode
: will automatically select “active on link” or “active per
request” depending of the casting mode.
o
Active on link
: USB pass-through from transmitter to receiver.
Suggested for unicast scenarios.
o
Active per request
: in case of multiple KVM endpoints controlling one PC,
for example, the USB link will be activated on request. Suggested for
multicast scenarios.
