40
11.
FIBER OPTIC CONNECTION
When extension distances over the standard Ethernet limit of 100m are required, a
Fiber Optic link can be used instead of the Cat. 5e/6 copper link. The Fiber Optic link
allows reaching distances up to 2Km or 60Km, depending if multimode or single mode
fiber is used. For this purpose VEO devices support standard 3.125 Gb SPF transceiver
modules (not included).
Just insert the SPF transceiver module in the SPF receptacle to make VEO devices ready
to fiber connection. Once the fiber cable is connected and the link is active, the related
connection LED will blink, as indication of a proper operation.
12.
FACTORY RESET
The VEO devices Factory Reset can be performed using the PC Utility Software (chapter
8), via Web page (chapter 9.1) or pressing for 10 seconds the reset button on the
devices using a tiny pin while the unit is powered on. The default Auto IP Address and
all the factory parameters will be restored.
