37
10.4. Functions
The Functions page allows configuring Video output, USB extension mode and Serial
over IP function, both for Transmitter and Receiver.
The Receiver page will look like follows:
10.4.1. Setup video output mode for Receiver
Enable Video over IP:
Check it to enable video extension over IP
Enable Video Wall:
Check it to enable the video wall composition function
Enable EDID Copy:
This function allows copying the output EDID and passing the
information to the Transmitter. It is limited to unicast mode.
Scaler Output Mode:
Select the required scaled output mode. Select “customize”
and digit 8 Hex values for more video output resolution and refresh rate
selections.
