70
Mana
9.
TROUBLESHOOTING
Here you can find
some fundamental problems and possible causes
, which can be
happen
during the use of VEO-SWC44
.
Find out the problem in the table below and
apply the indicated solution.
Problem
Cause
Solution
Using VEO-SWC44
for
Android
application
in
Android device or
Airplay
on
iOS
device, it can’t find
VEO-SWC44 device.
WiFi password of VEO-SWC44
changed when android or iOS
device is connected to the WiFi of
VEO-SWC44.
Reconnect the mobile by entering
password displayed on Home
Screen.
Image quality on the
main display screen
is not good.
The quality or length of the cable
between the VEO-SWC44 and
the display or the connection
between these two.
•
Replace the cable
•
Use another cable.
•
Check the cable to be fasten
properly.
Improper resolution for the main
screen.
Change the resolution on the
Setting configuration and match it
to the native resolution of the main
screen.
Bad wireless
connection. The
connection between
the transmitter and
the VEO-SWC44 is
not stable.
WiFi problems.
•
Interference in the radio
channel.
•
Overload in the radio channel.
•
VEO-SWC44 does not
automatically jump to other
channels when there are
changes in the RF environment.
•
Use a WiFi scanner to find a free
wireless frequency and channel
and select it via the setting
configuration.
•
Regularly
check
the
RF
environment
if
there
are
frequently changes in WiFi
networks in your environment.
Low signal strength:
•
Metal
cabinets,
walls,
construction elements, can
cause reflections deteriorating
the wireless signal.
•
Obstacles between wireless
transmitters and VEO-SWC44
cause lowering of the wireless
strength and quality.
•
Put the VEO-SWC44 closer to the
main screen.
•
Change the orientation of the
antennas at the rear panel of
VEO-SWC44 to the transmitter
direction.
•
Remove or limit as much as
possible all obstructions between
the transmitters and VEO-
SWC44.
•
Avoid placing the Base-unit in
(metal) cabinets, suspended
ceilings, under tables or in
adjoining rooms.