63 / 97
Introduction Manual ENC66
eckelmann.de
Abbildung 39:
Figure 39:
DIN example program in the StdHMI program editor
8.6.3
Saving the DIN program
The input program is to be saved as Quad1.din
Starting point: Program editor is active
Tabelle 35:
Table 35:
Saving a DIN program
Steps in stdHMI
Description
Save as F4
The screen displays a dialog screen
Input „Quad1.din“ in the dialog
screen
Save program as „Quad1.din“
8.6.4
Loading a program into the controller
The stored program test.din is to be loaded into the controller.
Starting point: Program editor is active
Tabelle 36:
Table 36:
Load a DIN program into the controller
Steps in stdHMI
Description
Program to NC F7
The screen displays a dialog screen
Select „Quad1.din“
The square contour is displayed
Accept F7
