ECKELMANN CI 3000, Operating Instruction

Page: 42 / 134

Installation and Startup of CI 3000 / SIOX
36 Version 2.09 09. April 2014
5.3.1 SMS Text Message Transmission via a GSM Modem
A GSM modem should be used if high reliability is called for when transmitting a
SMS text message.
With the GSM modem, an SMS text message is sent in the same way as with a mobile telephone. Because no
additional (land-line) services are needed from the telephone provider, it is quicker and more reliable than a con­
ventional modem.
When using a GSM modem, the following points must be considered, and in this order:
1. In addition to the main telephone number (telephony), the SIM contract of the GSM modem must
be equipped with its
own telephone number for data services (data service). Prepaid contracts
are therefore generally not suitable!
2.
Firstly , the PIN of the GSM modem must be entered at menu 6-1-8-2 of the store computer.
3. Only then may the GSM modem be connected to the store computer. Any other approach may
lead to the card being blocked, as the store computer will try to log in to the GSM modem, though
without possessing a permissible PIN.
5.3.2 FAX transmission via ISDN modem
If, in addition to the classical alarm signal generation using a PC with LDSWIn, the generation of SMSs or a
voice message, the transmission of alarms and messages via FAX is also required then the modem from
Blatzheim BM 33k6 ISDN pro must be used in the plant.
5.3.3 Modem hardware reset
In the event of unreliable modems it is possible to carry out a new start or restart by switching off the power sup­
ply on a cyclical basis. The zero-potential relay contact AUX (terminals 15, 16, 18) can be used as an interrupt
switch for the modem power supply.
In order to do this the following settings must be configured:
1. The parameter AUX relay must be configured to Modem (modem reset, menu 6-1-4-1).
2. Now the time interval (30..120 min.) between 2 resets can be set in menu 6-1-8-3.
The CI 3000 Store Computer now switches off the modem for short periods on a cyclical basis in accordance
with the specified time interval (ca. 10 seconds):
16 18 15 25 28 26 35 38 36
ZNR.
51203
68
131
DEF2
Modem
L
N
PRIO 1 PRIO 2 AUX