Echoflex Installation Guide
Open Loop CCT Sensor
EEP Select
The default EEP setting is configured to work with Echoflex controllers.
You can configure the sensor to be compatible with controllers that use
an alternate profile.
1. Press and hold the
[Teach]
button until the green LED is displayed.
Release the button to enter the menu and display the first item, the
blinking green LED.
2. Press and release the
[Teach]
button to cycle through the menu of
color LEDs and stop when the blue and red LEDs are both blinking.
3. Press and hold the
[Teach]
button until the LEDs stop blinking to
select EEP Select. The blue LED blink code displays the current setting.
4. Press and release the
[Teach]
button to navigate the options.
Indication
Setting
1 blue blink
EEP A5-06-04 Curtain Wall Brightness Sensor
2 blue blinks
EEP D2-14-25 Light Sensor and CCT (default)
3 blue blinks
General Profile
5. Press and hold the
[Teach]
button to make a selection.
Open Loop CCT Sensor
Page 7 of 8
Echoflex
