MAINTENANCE
TC-210
30
X7504083611
© 3/2018 ECHO Inc.
3.
Remove air filter and lightly brush debris from filter. Replace filter if it is
damaged, fuel soaked, very dirty, or the rubber
sealing edges are deformed.
4.
If filter can be reused, be certain it:
• Fits tightly in the air filter cavity.
• Is installed with the original side out.
5.
Install air filter cover.
Note: Carburetor adjustment may be needed after air filter cleaning/
replacement. See Carburetor Adjustment Section.
Fuel Filter
Level 1.
Fuel is VERY flammable. Use extreme care when mixing,
storing or handling, or serious personal injury may result.
1.
Use a clean rag to remove loose dirt from around fuel cap and empty
fuel tank.
2.
Pull the fuel filter from the fuel tank.
Do not damage fuel line while removing fuel filter from tank.
3.
Remove the filter (A) from the line
and install the new filter.
Note: Federal EPA regulations
require all model year 2012
and later gasoline powered
engines produced for sale in
the United States to be
equipped with a special low
permeation fuel supply hose
between the carburetor and
fuel tank. When servicing model year 2012 and later
equipment, only fuel supply hoses certified by EPA can be
used to replace the original equipment supply hose. Fines up
to $37,500 may be enforced for using an un-certified
replacement part.
Parts Required:
Tune up Kit
A
