OPERATION
TC-210
24
X7504083611
© 3/2018 ECHO Inc.
If engine does not start with choke in Run position after 10 pulls,
engine may be flooded. Allow unit to stand for one minute. Assure
choke remains in Run (
) position and pull starter handle/rope an
additional 10-15 times, or until engine starts and runs.
8.
After starting the engine, allow unit to warm up at idle for 2-3 min.
9.
Throttle Trigger
After engine warm-up, gradually depress throttle trigger to increase
engine RPM to operating speed.
Starting Warm Engine
The starting procedure is the same as Cold Start except DO NOT close the
choke.
1.
Stop Switch
Move stop switch button (A) to
RUN position.
2.
Purge Bulb
Pump purge bulb (C) until fuel is
visible in the “Clear” fuel return
line. Pump bulb an additional 4 or
5 times.
A
C
