OPERATION
TC-210
18
X7504083611
© 3/2018 ECHO Inc.
6.
Remove carriage bolts (F),
lockwashers (G), and nuts (H)
from top handle assembly.
7.
Place top handle assembly
between lower handles, align
mounting holes and attach using
carriage bolts (F), lockwashers
(G), and nuts (H). Carriage bolts
must be installed from the
outside through square holes in
the lower handle, then through
upper handle tube.
8.
Securely tighten lower handle bolts first, then the upper handle bolts.
Assure throttle cable is not twisted or wrapped around upper or lower
handle.
9.
Stand unit up.
10. Secure throttle linkage and stop
switch lead midway on right upper
and lower handle with cable clips.
Never perform tilling or cultivating while kick stand is in down
position, otherwise serious injury may result.
OPERATION
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit.
F
F
G,H
G,H
