TC-210
MAINTENANCE
X7504083611
33
© 3/2018 ECHO Inc.
ENGLISH
1.
Remove starter cover and cylinder
cover.
2.
Remove exhaust guide (A), gasket
(B), and screen (C) from muffler
body.
3.
Clean carbon deposits from muffler
components.
Note: When cleaning carbon
deposit, be careful not to
damage the catalytic element inside muffler.
4.
Replace screen if it is cracked, plugged, or has holes burned through.
5.
Assemble components in reverse order.
Exhaust Port Cleaning
Level 2.
1.
Remove spark plug lead from
spark plug, and remove engine
cover.
2.
Place piston at top dead center.
Remove muffler (A) and heat shield
(B).
3.
Use a wood or plastic scraping tool
to clean deposits from cylinder
exhaust port.
Never use a metal tool to scrape carbon from the exhaust port. Do
not scratch the cylinder or piston when cleaning the exhaust port. Do
not allow carbon particles to enter the cylinder.
4.
Inspect heat shield, and replace
if damaged.
5.
Install heat shield and muffler.
6.
Tighten muffler mounting bolts
(or nuts) to 90-110 kgf•cm (80-
95 in•lbf).
7.
Install engine cover and attach
spark plug lead.
8.
Start engine, and warm to
operating temperature.
Parts Required:
Heat Shield
A
C
B
A
B
